56cm Duck Family at Old Tap Water Feature with LED Lights by AmbientéT. Primrose Ambienté Fountain Care - Dual Pack De-Icer and Water Cleaner. This charming water feature would make a wonderful addition to any garden or patio.
The gently flowing water and the artistry of the feature are illuminated by integrated LEDs, enabling you to enjoy the soothing effect of the duck family water feature during the day and night. The UV and frost resistant polyresin structure of this water feature ensures it is ready for outdoor use all year round. The charming design of this duck water feature adds a splash of character to your outdoor space. The design becomes an instant eye-catcher sure to win favour among your guests.
Bring this water feature to life at any time of the day or night thanks to its LED lights, illuminating the water and the curves of the surrounding ducklings. Charming design - the water feature is an instant eye-catcher that adds a great sense of character and charm to your outdoor space. LED lights - enjoy the feature any time of the day or night with the integrated LED lights. Durable construct - hardwearing UV and frost resistant polyresin makes makes the feature perfect for long-term outdoor use. Self-contained - no additional reservoir required.
Cable length: 10m (32ft 9in). Mains Power vs Solar Power. The traditional way to install a water feature is to connect it to your main power supply, although solar powered water features are a great option, there are also benefits to choosing a mains powered feature.
Power is better to effectively run larger water features. These tend to have higher energy requirements, so a mains connection is required for reliable usage. Solar powered features are great for smaller features and birdbaths as they usually require less power. Mains powered water features allow for prolonged use. Solar panels only last as long as they have stored up power and will only work if there is good weather.Mains powered water features will work in any weather and in limited sunlight. Tips on Installation and Maintenance. A lot of water features come pre-assembled for the most part, with just a little hose/pump connecting to do before plugging it in to a mains socket.
Some of our bigger ones require wiring in a plug (which might involve a Part P Certified electrician), but otherwise all instructions will be included. To create our high specification, long-lasting water features, we use 304-grade stainless steel which contains high levels of chromium making it resistant to corrosion.Stainless steel is very resistant to rust because the chromium in the metal reacts with oxygen to form a protective layer. If this layer is broken down by mechanical damage or a powerful cleaning agent and rust does appear, simply remove the rust and the chromium oxide layer will reform. As well as it's hard-wearing features, grade 304 stainless steel is perfect for both contemporary and classical water feature designs, the highly polished finish of stainless steel is great for reflecting light into shaded areas of the garden.
If the feature has a reservoir that requires sinking underground, then the ground can be marked out to the exact size using perhaps a stick, gravel or sand. Sit the reservoir in the hole and make sure it is level. If you have enough room sit the pump on a flat stone so that it is not on the bottom of the reservoir and so helping the pump stay clear. Why do some Water Features come without a plug? We don't always supply a plug with a water feature, it depends on the product, style of feature, pump supplied and likely location that the product maybe installed.
All of our products are designed for ease of installation there are however, a specific set of rules set out by the building regulations which must be adhered too: "Building Regulations - Part P" this is a government directive which states that any NEW PERMANENT household or garden electrical supply must be installed by a competent Part P Certified electrician. Some of our products wont require a permanent installation, its worth considering a number of things in order to ensure you safely install your feature or seek the help and advice of a qualified electrician. 2 air stones each with 1.5m tubing - immerse the air stones into two separate areas to fully oxygenate your entire pond. 3m cable up to solar panel - find a sunny spot for the solar panel away from the pond.Air rate of 60 LPH - suitable for a pond up to 3000l in volume. Rubber feet - rubber feet help reduce noise and movement by gripping against the ground, absorbing the movements of the motor. If in any doubt seek the advice of a Part P Certified electrician. Full details of Part P available.
This item is in the category "Garden & Patio\Ponds & Water Features\Outdoor Fountains". The seller is "primrose_london_uk" and is located in this country: GB. This item can be shipped to United Kingdom.